Engine Yanmar® 4TNV84T diesel
Engine Power (kW) 48 hp (36 kW)
Fuel Type Diesel
Fuel Capacity 83.3 litres
Cooling System 31.2 litres capacity with 10 micron remote spin-on filter, 9 row single pass cooler with tilt out for cleaning. Variable speed hydraulic fan drive with automatic (based on coolant and oil temps) and auto/manual reversing capabilities. Rear-mount, single pass, 7-row radiator with 6.3 fins per inch, 13 U.S. qt. (12.3 L) capacity
Air Filter Dry, replaceable primary and safety elements
Cutting Width 381 cm (150")
Mowing Rate 4.3 hectares/hr
Deck Design 10-gauge steel constructed chambers with 12-gauge welded reinforcements. 1.5" (3.8 cm) square x 0.25" (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16" (0.48 cm) high-strength steel and 10-gauge exterior channels
Blades 27" (68.6 cm) long, 2.5" (6.4 cm) wide, 0.25" (0.64 cm) thick combination blades
Spindle Housing Ductile cast iron spindle housing
Spindle Bearings Dual greaseable tapered roller bearings. 3.2 cm diameter solid cold finished steel spindle shaft
Height of Cut 0.75" - 4" (1.9 cm - 10.2 cm) in 0.25" (0.6 cm) increments. 3-position 0.030" (0.08 cm) incremental calibration
Roll-Over Protection (ROPS) 2-post ROPS and seat belt standard
Armrests Standard
Ground Speed - Forward 0-21 km/h
Mowing Speed 0-11.3 km/h
Traction Drive (System) Parallel hydrostatic, closed loop system with full-time 4WD forward/reverse in low (mow) and high (transport) range. Variable displacement piston pump with electronic servo control powers dual speed piston motor drive into double reduction planetary in front, and mechanical axle in rear. Smart Power® feature controls traction speed to maintain optimal cutting blade speed
Controls Ignition switch, low and auto mow/transport range selection switch, PTO switch, light switch. Foot-operated traction pedal, individual foot-operated steering brake control of left and right wheels with parking brake lock. One 2-position lift switch
Steering Controls Power steering with dedicated power source, tilt steering
Tyres Front: 29" x 14" - 15”, 6-ply Rear: 20" x 10" - 10", 4-ply
Seat Premium seat with adjustments for operator weight via air ride suspension, seat fore/aft position, seat back angle, arm rest height and retractable seat belt
Ground Clearance 15.3 cm
Assembled Height Metric 217 cm
Weight 2,188 kg with full fluids
Warranty 2 years limited. Refer to Operator's manual for more details.
